230 V AC motors

The electronic control panels for one or two 230 V AC motors guarantee complete control over the automation system and simple configuration of all parameters. 

Complete range

The range of 230 V AC panels includes three different models, to ensure the best answer to the needs of any installation:

• Control panels for swing gate motors (Ditec PWR 50 AC and Ditec CUBIC 230 V AC), ref. LCA70 and LCA80
• Control panels for industrial sliding gate motors (Ditec CROSS 18) and for actuators for industrial sectional overhead doors (Ditec DOD 14) and for 230 V AC barriers, ref. LCA85

CONTROL PANEL FOR SWING GATE. DITEC LCA70 and LCA80

Ditec LCA70 and LCA80 are the multifunction control panels for one or two 230 V AC motors for swing gates, both electromechanical or hydraulic motors.
The right control panel for upgrading and modernising any swing gate: whether with external, articulated arm or in-ground gate openers.

Two versions of the control panel are available:

• LCA70 - a control panel complete with 433.92 MHz receiver module, suitable for the needs of the majority of installations.
• LCA80 - a premium control panel with exclusive features and advanced configuration capability: larger number of inputs and outputs to caters comprehensively for any possible application. The receiver module is optional, to let the customer choose between two different operating frequencies (433.92 MHz or 868.35 MHz).

CONTROL PANEL FOR INDUSTRIAL SLIDING GATE MOTORS, FOR ACTUATORS FOR INDUSTRIAL SECTIONAL OVERHEAD DOORS AND FOR 230 V AC BARRIERS. DITEC LCA85

Ditec LCA85 is the new multifunction control panels for one 230 V AC motors for industrial sliding gate motors, for actuators for industrial sectional overhead doors and for 230 v ac barriers.
Ditec LCA85 is already included in Ditec CROSS 18 motors and is compatible with Ditec DOD 14.

Ditec LCA85 is a premium control panel with exclusive features and advanced configuration capability: larger number of inputs and outputs to caters comprehensively for any possible application. The receiver module is optional, to let the customer choose between two different operating frequencies (433.92 MHz or 868.35 MHz).

NEW DITEC LCA RANGE!

Universal

Thanks to its outstanding functions and features, LCA control panels is adapted for retrofit and new installations, compatible also with competitors motors:

• The innovative proprietary continuous position monitoring and control system (Ditec Virtual Encoder) even lets you control motors without encoders with the utmost precision and safety
• Time management functions: individual motor operating times (on LCA70 and LCA80), motor delay times, deceleration at end of opening and closing travel, obstacle detection, increased starting torque, acceleration at start of opening and closing movements, electric lock activation, movement reversal and closing force against mechanical stops
• Management functions for approach speed during opening and closing movements, thrust force against obstacles during normal operation and final approach, and force settings
• Settable obstacle thrust force sensitivity for both normal operation and for final approach during opening and closing movements
• Automatic ramp adjustment: in low temperature conditions, the increased initial torque duration is set at the highest value possible and acceleration time is reduced to the lowest value possible
• Settings for pressure hold function for hydraulic actuators (on LCA70 and LCA80)
• Safety device test
• Compatible with Ditec ZEN series and its encrypted AES-128 bit protocol and protected Mode
• Separate power outputs for 24 V AC and 24 V DC accessories
• Slot for plug-in Ditec accessories
• 2 dedicated inputs (for open and closed positions) for self-testing resistive active safety edges (8.2kΩ) (on LCA80 and LCA85)
• 2 inputs for very low voltage logical limit switches for open and closed positions for each motor (optional with LCA80, mandatory with LCA85). Stop limit switches may also be managed, if connected in series with motor phase
• 1 configurable 24 V DC output on LCA70 (2 outputs on LCA80 and LCA85) for accessories such as a courtesy light, flashing light and gate open indicator lamp, and active output with state dependent on state of gate.  Innovative signaling is also available in LCA85 to indicate the status of the stop, safeties and any maintenance alarm, which is very useful in industrial installations
• Configurable 12 V AC output for electric lock (on LCA70 and LCA80), and dedicated output for 230 V AC flashing light

Versatile

• the menu with configuration wizard (Wizard WZ) lets you configure the control panel quickly and simply during initial setup
• pre-configured operating logics with the possibility to set reduced speeds in the approach and departure phase
• more expert users can customised over 100 parameters, using the easy-to-use menu, the display and the navigation buttons- p assword-protected access to configurations prevents modification by unauthorised persons
• unused inputs may be disabled to prevent subsequent installation of unauthorised accessories
• a choice of two operating frequencies (433.92 MHz and 868.35 MHz), for avoiding disturbance or interference
• temperature sensor, which prevents the motors from icing in case of very cold weather, ice or snow (NIO - No Ice Option - function)

Innovative Function

• Optimal adjustment of end-of-maneuver positions from the control panel: after setting the end-of-maneuver point by adjusting the limit switches, you can configure from the panel a stop position beyond the limit switch at which to end the maneuver. This function is very useful with DOD 14 because you can avoid re-adjusting the limit switches at the motor board as the springs lose tension
• GREEN mode function to reduce power consumption of the accessories during stand-by
• high traffic function: this function offers benefits during peak traffic times in condominium applications by reducing wait times for users while limiting the possibility of motor overheating. When enabled, the function monitors the intervals between consecutive open requests and temporarily extends the automatic close delay time in case of consecutive requests within short intervals
• compatible with Entrematic Smart Connect, the new system for managing gates locally or remotely from a mobile app or PC 

CONTROL PANEL FOR SLIDING GATE MOTORS and FOR INDUSTRIAL SECTIONAL OVERHEAD DOORS, Ref. E1, E1A, LOGICM (while stocks last)

Various versions are available with integrated radio decoders and receivers controlled separately (open, close, part-open and stop), with electronic adjustment or by varying the transformer voltage.

The panels allow time setting, timer-controlled automatic closing, inching control, hold-to-run control and emergency stop and reverse. 

Safety first!

All 230 V AC panels are fitted with ODS systems, making it possible to configure stoppage of the operating device or reversal of movement, if an obstacle is detected during movement.

Accessories are fed by 24 V DC, ensuring safety during wiring operations.

The more sophisticated panels also feature a safety test, in other words continuous monitoring of safety devices to ensure constant checking of the system. 

Reliable and long lasting

All panels feature an IP55 protection rating: the electronic boards and transformers are protected inside a plastic box, which can be opened simply by removing four closing screws.

The more sophisticated versions are fitted with a No Ice Option (NIO) feature: an integrated temperature sensor enables the panel to adjust the performance of the motor in freezing, icy or snowy conditions.